|
|
|
|
Zertifikate im Unix-Bereich |
*.rar
Junior Member
Dabei seit: 13.10.2003
Beiträge: 103
Herkunft: Rarlabs
|
|
Von Cisco gibt es auch noch das "Unix Fundamentuals", allerdings bislang nur in Englisch.
|
|
25.02.2004 21:51 |
|
|
Menetekel23
gezählt, gewogen, zerteilt
Dabei seit: 22.05.2003
Beiträge: 296
Herkunft: /dev/null
Themenstarter
|
|
Die Fragen sehen beim LPI ganz ok aus:
http://www.lpi.org/de/tasks_201.html
Die LPI Level 2 Prüfung 201 prüft die Grundfertigkeiten in folgenden Bereichen:
Linux Kernel
Systemstart
Dateisysteme
Hardware
Systemverwaltung
Systemanpassung und Automatisierung
Fehlersuche
OBJECTIVE: 2.201.3 Patching a kernel. TYPE: fitb
__________ and __________ are two commands that are typically used to patch kernel sources. (Do NOT include any paths to commands with your answer.)
bzip2, bunzip2, gzip, gunzip, patch, patch-kernel
OBJECTIVE: 2.202.1 Customizing system startup and boot processes TYPE: MCSA
You have just added PCMCIA to your system so you can add a PCMCIA Ethernet adapter to connect to a wireless network. Upon testing you discover it works properly when you enable it manually, but it does not initialize during boot. Which of the following is most likely the problem?
Card services is not configured properly to initialize during the boot process.
The init scripts do not include PCMCIA initialization or are not initializing in a suitable sequence.
PCMCIA support must be compiled into the kernel.
Hot-plug support is not enabled in the kernel at boot.
OBJECTIVE: 2.203.2 Maintaining a Linux filesystem TYPE: MCMA
You suspect your ext2 filesystem has bad blocks. You wish to do a non-destructive test for bad blocks. Which of the following programs will perform a non-destructive test for bad blocks? (Please select all that apply)
fsck
mke2fs
tunefs
badblocks
e2fscan
OBJECTIVE: 2.204.1 Configuring RAID. TYPE: MCSA
You have a system with five separate drives and wish to get the greatest throughput from these drives by implementing RAID. Which of the following will provide the greatest throughput using all five drives?
A. RAID 0
B. RAID 1
C. RAID 3
D. RAID 5
OBJECTIVE: 2.209.1 Configuring a samba server. TYPE: FITB
Question: You are on a network that has both UNIX and Windows servers and clients. From a Linux client, what command would be used to browse Windows shares on a given server? Please do NOT include any options or arguments or paths with your answer.
smbclient
OBJECTIVE: 2.211.1 System logging. TYPE: MCSA
You are testing some new settings for syslogd in /etc/testlog.conf but none of your changes seem to take effect when you send a SIGHUP to syslogd. What is likely to be the problem?
You have errors in your configuration file that are causing them to be ignored upon reading of the configuration file.
syslogd does not respond to SIGHUP
The wrong configuration file is being read on SIGHUP.
You cannot use alternate configuration files with syslogd and you must rename your testlog.conf file.
OBJECTIVE: 2.213.1 Automating tasks using scripts. TYPE: FITB
You have written a script to monitor logins but it does not report on any local machine logins via XDM. What file must you monitor to include this type of login?
wtmp or /var/log/wtmp
OBJECTIVE: 2.214.2 Creating recovery disks. TYPE: MCMA
Question: Which of the following are typically used to zero a device to be mounted via loopback?
mkloop
dd
/dev/zero
/dev/loop
mke2fs
__________________ If the world didn't suck a little bit, we'd all fall off.
__________________________________________
Höre die Worte des Allmächtigen:
cat /usr/src/linux/arch/i386/boot/bzImage > /dev/dsp
Dieser Beitrag wurde 2 mal editiert, zum letzten Mal von Menetekel23: 26.02.2004 10:44.
|
|
26.02.2004 10:42 |
|
|
|
|
|
|